How to Prevent the JumpYeti Trampoline from Sinking into Soft Ground

JumpYeti trampolines are designed for safety, durability, and fun. However, even the best trampolines can encounter problems if not installed correctly, especially on soft or uneven ground.

One of the most common issues that can happen to your trampoline? Sinking legs. This is a serious issue that needs to be addressed when it happens and ideally can be prevented before it happens.

When your trampoline starts to settle into the earth, it compromises its stability and can ultimately lead to frame warping or an unsafe bouncing surface.

In this guide, we’ll explore how JumpYeti sinking prevention works, the tools available to keep your trampoline level, and the steps you can take right now to ensure your trampoline stays secure for years to come.

The Ultimate Guide to Preventing Sinking with JumpYeti

Sinking is most common in areas with soft soil, heavy rainfall, or frequent trampoline use. Without a solid foundation, the weight and movement of jumpers can slowly push the trampoline legs into the ground. Fortunately, there are simple, effective ways to prevent this.

Choose a Level Spot

Start by placing your JumpYeti trampoline on a flat, level area. Avoid slopes, depressions, or sections of the yard that tend to collect water.

• Clear the area of grass, roots, and rocks.
• Check that the ground is firm and compacted.
• Avoid placing the trampoline directly on wet or spongy ground.

Prepare the Ground

The right base makes all the difference. Prepare a reinforced foundation beneath each leg if your soil is soft or prone to shifting.

• Remove sod or grass to expose bare soil.
• Add a layer of compacted road base, gravel, or paver sand beneath each trampoline leg.
• Compact the material using a hand tamper or plate compactor.

How JumpYeti Sinking Prevention Works

JumpYeti trampolines are built with stability in mind. While the frame is sturdy and the legs wide, installing your trampoline on a soft surface without any support increases the risk of uneven sinking. 

Here’s where the JumpYeti sinking prevention methods shine:

• Weight Distribution: Solid bases like gravel pads help distribute the trampoline’s weight over a larger area.
• Anchor Stability: Ground anchors keep the trampoline from shifting and reduce stress on individual legs.
• Reduced Ground Contact: Trampoline support blocks or leg cups raise the frame slightly, minimizing direct soil pressure.

These techniques combine to form an anti-sinking system that protects your trampoline from the elements and heavy use.

JumpYeti’s Anti-Sinking System

Want a more structured setup? Consider adding anti-sinking accessories that take the guesswork out of installation:

• Trampoline Support Blocks: Designed to sit under each leg, these heavy-duty blocks are made from durable plastic or rubber and distribute weight more evenly.
• Gravel Pads or Stone Pavers: Available at most hardware stores, these offer excellent support and drainage, preventing water from softening the ground under your trampoline.
• Ground Anchors: These keep your trampoline in place during jumping or windstorms and prevent the legs from rocking, which leads to sinking.
• Drainage Control: Surrounding your trampoline area with gravel or perforated pipe can help redirect water and keep the soil underneath drier.

Each component must work together to stabilize the trampoline, especially in rainy or loose-soil conditions.

Extra Tips to Keep Your JumpYeti Above Ground

• Routine Checks: Periodically inspect the area under each leg. If you notice any sinking or soft spots, reposition the trampoline or reinforce the base.
• Re-Leveling: Over time, you may need to add or adjust the gravel or blocks beneath your trampoline to keep it level.
• Don’t Bury It: JumpYeti trampolines are not designed to be buried or partially submerged in the ground. Doing so may void the warranty and pose safety hazards.
• Consider a Mat: Rubber landscaping mats or gym flooring beneath each leg can add another layer of protection and help cushion impacts.

Final Thoughts on JumpYeti Sinking Prevention

Keeping your JumpYeti trampoline from sinking into the ground doesn’t require complex tools or a professional installation. With the right location, a solid base, and a little attention throughout the year, you can enjoy safe, level bouncing all season long.

Whether you opt for gravel pads, support blocks, or ground anchors, or even a combination of all three, your trampoline will stay firmly in place. Remember, you want your trampoline where it belongs: above ground and ready for fun.

Prevent sinking, extend the life of your trampoline, and give your family the best (and safest) bounce with JumpYeti’s trusted solutions.

For more accessories and installation advice, visit jumpyeti.com.